KeraSpace

Deck

Operator view

Deck

Ground station controller for someone at the antenna. Link a station, run the pre-pass checklist, and see pass hints from satellites you follow on Mesh.

Station

Connect · USB

Plug in your KeraSpace receiver, then Connect. The browser asks which USB serial port to open. No invented station ID until the kit handshake lands.

  1. Use Chrome or Edge on a laptop (Web Serial / WebUSB).
  2. Plug the receiver with a data USB cable (not charge-only).
  3. Press Connect and pick the port in the browser prompt.

Station ID: none · USB link: not connected · press Connect

Checklist key: local (default until kit registers)

Checklist

Pre-pass · 0/5

Pre-pass checklist for this station. Signed in: syncs to your account. Signed out: stays on this device.

Persist · This device only